controle remoto drc450 motorola

8/4/2019 Controle Remoto DRC450 Motorola

http://slidepdf.com/reader/full/controle-remoto-drc450-motorola 1/2

OVERVIEW

The Motorola DRC450 universal remotewill control up to four devices,includingMotorola's interactive digital terminals*,most TVs,VCRs, Amplifiers, DVD players,PVRs, Tuners,and CD players.

*NOTE:Digitalmodelsincludethe DCT1000,DCT1200,DCT1700,DCT2000,DCT2500,and DCT5100.TheDRC450canalsocontrololder  Motorolaanalogmodelslike theCT1900,CFT2100,CFT2200,and CFT3300.

The DRC450 requires two new AAalkaline batteries (included) and haseasy programming to control yourMotorola interactive digital terminal, aswell as all ofthe basic functions ofyourother original remote controls.Moreover,the DRC450 helps eliminate the need touse multiple remote controls.

For best results,please read and performall instructions listed herein.Also,keepthese instructions for future reference.

FEATURES AND FUNCTIONS

Use the DRC450 mode keys (i.e., AUDIO,VCR/DVD, CABLE,or TV) to control aspecific device.When pressed,theselected mode key will light,confirmingyour choice.Use the other keys to per-form desired actions (see the followingkey chart).

 NOTE:Theselectedmodewill remainactiveuntilyoupressanothermodekey.

PressAUDIO,VCR/DVD ,

CABLE,or TV once tocontrol a device.

PressPOWERonce toturn on or offtheselected home enter-tainment device.

PressHELP once to

display the help screen.

PressMUTE once to

turn sound offor on.

UsePAGEL (orPAGEM)to page up (or down)through menu screensand the electronicprogram guide.

UseLOCK** to restrictviewing ofselectedprograms (ParentalControl).

UseEXIT to exit menuor guide.

Use INFO to displaycurrent channel andprogram information.

Usethesekeys tomovethe cursorin the elec-tronic program guideand menu screens.

UseOK** tochosemenuoptions,PPV events,and to tune programs

from the electronicprogram guide.

UseGUIDE to displaythe electronic programguide.

UseMENU to displaythe main menu.

In TV or CABLE mode,use VOLUME + (orVOLUME-) to raise (orlower) sound volume.

UseCHANNEL + (orCHANNEL -) to selectthe next higher (orlower) channel.

UseLAST to recall lastchannel or go back onescreen in the menu.

In the CABLE mode,press FAVORITE onceto display programmedfavorite cable channels.

These functions areset by your cablesystem operator.

Use the keypad (0 ~ 9)to directly select thechannels (e.g.,09 or031).

Press TV/VCR BYPASSonce to switch VCR toview TV or tape (notsupported by allapplications).

UseENTER/MUSIC todisplay menu ofdigitalmusic channels,or toenter channels onsome TV models.

In the VCR/DVD and TVmodes,use the STOP,PAUSE, PLAY, REW.,and F.FWD. keys to

control a VCR (or DVDplayer). To recorda program on a VCR,press RECORD once.

In the CABLE mode,press DAY> (or <DAY)once to move theelectronic programguide ahead (or back)24 hours.

**NOTE:Functionalityof theLOCK and OK keysaredependentonthe softwareand themodelof Motorolainteractivedigitalterminal.

INSTALLING BATTERIES

1. On the DRC450’s back,pull backthe battery cover and remove it.

2. Use the two (2) supplied fully-charged AA alkaline batteries.Match their + and -marks to the+ and - marks in the battery case,then insert the batteries.

3. Push the battery cover backinto place.

4. Test the unit by pressing POWERand any mode key (e.g., AUDIO,VCR/DVD, CABLE,or TV).If thebatteries are inserted correctly,theselected mode key will be lit.

 NOTE:Whenaselectedmode keyblinkstwotimeswitheachkey press,thisindicatesthat thebatteriesaregettinglow.Replacethemwithin20minutes;otherwisetheDRC450mayloseitssettingsand requirereprogramming.

PROGRAMMING A SPECIFICDEVICE CONTROL

The DRC450 is preprogrammed at thefactory to operate a RCA TV and VCR(or DVD player),a Motorola (GeneralInstrument) interactive digital terminal,and a Pioneer audio device. To controldevices other than the default brands,perform the following steps;otherwiseskip this section:

 NOTE:ForprogrammingTV/VCRCombocontrol,see thenextsection.

1. Turn on a device (e.g.,VCR) and,if applicable, insert media, (e.g.,cassette or disc).

 NOTE:Pleasereadsteps2-4 completelybeforeproceeding.Highlightor writedownthecodes anddeviceyou wishto programbefore movingonto step2.

2. On the DRC450,press and hold amode key (i.e.,AUDIO,VCR/DVD,CABLE,or TV) for at least 6 seconds,until you see the programmingmode start.E ach mode key lightwill turn off and on sequentially,starting with AUDIO on through TV,and the sequence will repeat twice.At this time,release the mode keyand wait until it’s lit continuously.

3. Locate the code for your device in Manufacturer’s Codes on the back

ofthis user guide.Brands are listedin alphabetical order with the mostpopular codes listed first.

4. Enter the first four-digit code foryour device.If you perform thisprocedure correctly,the selectedmode key will blink three times.

 NOTE:Ifyouenter aninvalidcode,theselectedmodekeywill turnoff.Repeat steps2through4 witha validcode.

5. Aim the DRC450 at your deviceand press POWERonce.The deviceshould turn off.If it does notrespond,repeat steps 2-4,tryingeach code listed for your branduntil you find one that works.Ifitstill does not work,try Searching For Your Code.

 NOTE:Ifthe devicedoesnot haveaPOWER k ey, p ress t he (  Play  )key.

6. For future reference,write your

device code in the appropriateboxes below:

AUDIO Code:

Device Type:______________

VCR/DVD Code:

Device Type:______________

CABLE Code:

TV Code:

7. Repeat steps 1 through 6 for eachdevice you want to control.

PROGRAMMINGTV/VCR COMBO CONTROL

1. Turn on the TV/VCR Combo andinsert a video cassette.

 NOTE:Pleasereadsteps2-4 completelybeforeproceeding.Highlightor writedownthecodes anddeviceyouwish to programbefore movingonto step2.

2. On the DRC450,press and hold aVCR/DVD for at least 6 seconds,until you see the programmingmode start.Each mode key lightwill turn off and on sequentially,starting with AUDIO on through TV,and the sequence will repeat twice.At this time,release VCR/DVD andwait until it’s lit continuously.

3. Locate the code for your device inSetup Codes For TV/VCR Comboson the back.Brands are listed in

alphabetical order with the mostpopular codes listed first.

4. Enter the first four-digit code foryour device.Ifyou perform thisprocedure correctly, VCR/DVD willblink three times.

 NOTE:Ifyouenter aninvalidcode,VCR/DVD  willturn off.Repeatsteps2through4 witha validcode.

5. Aim the DRC450 at the TV/VCRcombo and press POWER once.The device should turn off.If itdoes not respond,repeat steps 2-4,trying each code listed for yourbrand until you find one thatworks.If it still does not work,trySearching For Your Code.

 NOTE:IfthedevicedoesnothaveaPOWER k ey, p ress t he (  Play  )key.

 NOTE:Ifyou’velocateda TV/VCRcodethatworks,butit hasa separateTV 

code,you’llalsoneedto programit intoDRC450to accessvolumecontrol.Performthestepsin“Programming DeviceControl”anduse TV  forthemodekey(e.g.,pressandhold TV  ).

6. For future reference,write yourdevice codes in the boxes below:

TV/VCR Combo Code:

TV Code (if used):

SEARCHING FOR YOUR CODE

If your home entertainement device doesnot respond to the DRC450 after tryingall of the codes listed for your brand,orif your brand is not listed at all,trysearching for your code.

For example,after trying all of the codesfor your TV,you still cannot get theDRC450 to operate your TV,then:

1. Turn on your TV.

2. On the DRC450,press and holdTV(at least 6 seconds) until you seethe programming mode start.Eachofthe mode key lights will turn off and on sequentially,starting withAUDIO on through TV,and thesequence will repeat twice.Duringthis time,release TV and wait untilit’s lit continuously.

3 . P re ss t he (Up) cursor key onceto start the search mode.

 NOTE:Inthesearchmode,the DRC450willsendIRcodesfromitslibrarytotheselectedcomponent,startingwith themostpopularcodes first.Whenthedevicerespondstoa subsequentkeycommand(e.g.,POWER  ),the correct devicecodewill befound.

4. Press POWER once.The TV key willlight on and off,showing that anIR code has been sent.

5. Ifyour television does not turn off,press the (Up) cursor key onceagain to call up the next IR codeand press POWERonce again.

6. Ifyour television still does notturn off,repeat step 5 as manytimes as needed until your TVturns off.

7. When your television does turn off,a working code has been found.Press OK once to save the code andtheTV key will blink three times,confirming the selection.

8. To search for the codes ofyourother devices,repeat steps 1through 7,but substitute theappropriate mode key (i.e.,VCR/DVD,CABLE,or AUDIO) for thedevice you are searching for.

CHECKING THE CODESIf you have set up the DRC450 using theSearching For Your Code procedure,youmay need to find out which four-digitcode is operating your equipment.

Perform the following procedure afteryou have set up your devices to find outwhich four-digit code is operating yourequipment.For example,to find outwhich code is operating your TV:

1. Turn on your TV.

2. On the DRC450,press and holdTV(at least 6 seconds) until you seethe mode light sequence start.Each ofthe mode key lights willturn off and on sequentially,start-ing with AUDIO on through TV,andwill repeat twice.During thesequence,release the TV key andwait until it stays lit continually.

3. Press 9 - 9 - 0.The TV key willblink three times.

4. To view the code for the first digit,press and release 1.Count thenumber of TV key blinks (e.g.,3blinks =3) and write down thenumber in the leftmost TV codebox in step 6 of  Programming Device Control .

 NOTE:Themodekeywillnotblinkif thecodedigitisa“0”.

5. Repeat step 4 three more times foreach successive digit by pressingand releasing 2, 3,and then 4.Finish writing down the TV codein the remaining TV code boxes.

6. To check for the codes ofyourother devices,repeat steps 1through 5,only substitute theappropriate mode key (i.e.,VCR/DVD, CABLE, or AUDIO) for thedevice you are checking.Writedown the codes in the appropriate

device code boxes (see step 6 of Programming Device Control ).

CHANGING VOLUME LOCK 

Your new DRC450 is set to control thevolume ofa device through its associatedmode(i.e., through the Motorolainteractive digital terminal in the Cablemode,through the TV in the TV mode,through the VCRor DVD player in theVCR/DVD mode,an d through theaudiodevice in the Audio mode).If your TV isnot remote controllable,or if you wouldlike the volume to be controlled by a dif-ferent device, you can change the VolumeLock setting to control a volume througha non-associated mode (e.g., throughthe  Motorola interactive digital terminal in the TV mode).

Changing the Volume Lock setting to

the Cable,VCR/DVD,or TV mode willchange the volume control for all modesexcept Audio, which will continue tocontrol its own volume.If you changethe Volume Lock setting to the Audiomode,all modes (i.e.,Audio.,Cable,VCR/DVD,and TV) will be controlled bythe Audio mode.

To Change The Volume Lock SettingTo Another Mode:

1. On the DRC450,press and hold amode key (i.e., AUDIO,VCR/DVD,CABLE,or TV) for at least 6 seconds,until you see the programmingmode start. Each mode key lightwill turn off and on sequentially,starting with AUDIO on through TV,and the sequence will repeat twice.At this time,release the mode key

and wait until it’s lit continuously.

2. Press and releaseVOLUME +.

3. The mode key’s light will blinkthree times,indicating volume hasbeen locked to the selected mode.

4. Now,whenever you pressVOLUME+ , VOLUME -,or MUTEon the DRC450,volume will becontrolled by selected mode,independent ofthe current mode.

To Unlock Volume Lock:

1. On the DRC450,press and hold amode key (at least 6 seconds) untilyou see the programming modestart.Each mode key light will turnoffand on sequentially,startingwith AUDIO on through TV,and thesequence will repeat twice.Duringthis time, release the mode key andwait until it’s lit continuously.

2. Press and releaseVOLUME-

.

3. The mode key light will blink threetimes,indicating volume has beenunlocked for the selected mode.

4. Now,whenever you pressVOLUME+ , VOLUME -,or MUTE onthe DRC450,the volume controlswill reset to their original device.

TROUBLESHOOTING

PROBLEM: A mode key does notblink or blinks 2 timeswhen you press a key.

SOLUTION: Replace the batteries withtwo (2) new AA alkalinebatteries.

PROBLEM: A mode key blinks whenyou press a key,but home

entertainment componentdoes not respond.

SOLUTION: Make sure the DRC450 isaimed at your homeentertainment deviceand is not farther than15 feet away.

continuedon back...

Fold Fold

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

       F     o       l       d

DRC450

UNIVERSAL REMOTE CONTROL

MADE IN INDONESIA

USER GUIDE

Moto DRC450_Mnl 10/2/02 12:04 PM Page 1

8/4/2019 Controle Remoto DRC450 Motorola

http://slidepdf.com/reader/full/controle-remoto-drc450-motorola 2/2