mb3001 vidrio del refri

7/27/2019 Mb3001 Vidrio Del Refri

1/39


2/39


3/39

Page 1/6

Safety data sheet according to 1907/2006/EC, Article 31

Printing date 20.10.2012 Revision: 20.10.2012

1 Identification of the substance/mixture and of the company/undertaking

Product identifier

Trade name: Proteinase K (PKA) Solution

Article number: MC7001 Relevant identified uses of the substance or mixture and uses advised against Application of the substance / the preparation: Laboratory chemicals

Details of the supplier of the safety data sheet Manufacturer/Supplier:

Promega Corporation

2800 Woods Hollow Road Madison, WI 53711U.S.A.1-608-274-43301-800-356-9526

SDS author: [email protected]

Further information obtainable from:77 Science Park Drive02-16 Cintech III Singapore Science Park I 118256 Singapore

Tel: (65) 6513 3450Fax: (65) 6773 5210 E-mail Address: [email protected]

SDS author: [email protected] Emergency telephone number:For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USAand Canada: 1-800-424-9300Outside USA and Canada: +1 703-527-3887 (collect calls accepted)

2 Hazards identification

Classification of the substance or mixture

H303 May be harmful if swallowed.

Label elementsGHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS).

Hazard pictograms Void Signal word Warning

Hazard statements May be harmful if swallowed. Precautionary statementsCall a POISON CENTER or doctor/physician if you feel unwell.

(Contd. on page 2)SG


4/39

Page 2/6




(Contd. of page 1)Other hazards

Results of PBT and vPvB assessment PBT: Not applicable.vPvB: Not applicable.

3 Composition/information on ingredients

Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.

Components: Void

4 First aid measures

Description of first aid measuresGeneral information: No special measures required.

After inhalation: Supply fresh air; consult doctor in case of complaints. After skin contact: Generally the product does not irritate the skin. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: If symptoms persist consult doctor. Information for doctor: Most important symptoms and effects, both acute and delayed None Indication of any immediate medical attention and special treatment needed No further relevant information available.

5 Firefighting measures

Extinguishing mediaSuitable extinguishing agents:CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.Special hazards arising from the substance or mixture None known

Advice for firefighters No special advice. Protective equipment: No special measures required.

6 Accidental release measures

Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections

No dangerous substances are released.See Section 7 for information on safe handlingSee Section 13 for disposal information.

7 Handling and storage

Handling Precautions for safe handling No special measures required.



5/39

Page 3/6




(Contd. of page 2) Information about fire - and explosion protection: No special measures required.

Conditions for safe storage, including any incompatibilitiesStorage

Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Not required. Further information about storage conditions: None.Specific end use(s) No further relevant information available.

8 Exposure controls/personal protection

Additional information about design of technical facilities: No further data; see item 7.

Control parameters Ingredients with limit values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.

Additional information: The lists valid during the making were used as basis. Exposure controls Personal protective equipmentGeneral protective and hygienic measuresThe usual precautionary measures are to be adhered to when handling chemicals.

Respiratory protection: Not required. Protection of hands:Protective gloves.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

Material of gloves:The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.

Penetration time of glove material:The exact break trough time has to be found out by the manufacturer of the protective gloves and has to beobserved.

Eye protection: Goggles recommended during refilling.

9 Physical and chemical properties

Information on basic physical and chemical propertiesGeneral Information

Appearance: Form: Fluid Colour: Colourless

Odour: Characteristic

Odour threshold: Not determined.Change in condition

Melting point/Melting range: undetermined Boiling point/Boiling range: undetermined

Flash point: > 100C

Flammability (solid, gaseous) Not applicable.



6/39

Page 4/6




(Contd. of page 3)

Ignition temperature: 400C

Decomposition temperature: Not determined.

Self-igniting: Product is not selfigniting. Danger of explosion: Product does not present an explosion hazard.

Explosion limits: Lower: 0,9 Vol %Upper: Not determined.

Vapour pressure at 20C: 0,1 hPa

Density: Not determined Relative density Not determined.Vapour density Not determined.

Evaporation rate Not determined.

Solubility in / Miscibility with

Water: Not miscible or difficult to mix Partition coefficient (n-octanol/water): Not determined.

Viscosity: dynamic: Not determined. kinematic: Not determined.

Solvent content:Organic solvents: 50,0 %Water: 49,8 %

Other information No further relevant information available.

10 Stability and reactivity

ReactivityChemical stabilityThermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions No dangerous reactions knownConditions to avoid No further relevant information available.

Incompatible materials: No further relevant information available. Hazardous decomposition products: No dangerous decomposition products known

11 Toxicological information

Information on toxicological effects Acute toxicity: LD/LC50 values relevant for classification: No data available Primary irritant effect: on the skin: No irritant effect. on the eye: Irritating effect.Sensitization: No sensitizing effects known.

SG

(Contd. on page 5)


7/39

Page 5/6




(Contd. of page 4)

12 Ecological information

Toxicity Aquatic toxicity: Not harmful to the aquatic environment Persistence and degradability Not available Behaviour in environmental systems: Bioaccumulative potential Not known Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Not available Additional ecological information:General notes:Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Results of PBT and vPvB assessment PBT: Not applicable.

vPvB: Not applicable.Other adverse effects No further relevant information available.

13 Disposal considerations

Waste treatment methods Recommendation Disposal should be in accordance with applicable regional, national and local laws and regulations. Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additionalhandling information and protection of employees.

Uncleaned packaging: Recommendation: Disposal must be made according to official regulations.

14 Transport information

UN-Number None

UN proper shipping name None

Transport hazard class(es) None

Packing group None

Environmental hazards: Marine pollutant: No

Special precautions for user Not applicable.

Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.

15 Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixtureGHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS).

Hazard pictograms Void (Contd. on page 6)

SG


8/39

Page 6/6




(Contd. of page 5)Signal word Warning

Hazard statements May be harmful if swallowed. Precautionary statementsCall a POISON CENTER or doctor/physician if you feel unwell.

National regulationsClass Share in %

Wasser 49,8 NK 50,0

Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16 Other informationThis information is based on our present knowledge. However, this shall not constitute a guarantee for anyspecific product features and shall not establish a legally valid contractual relationship.

Department issuing MSDS:Promega CorporationSafety Department 2800 Woods Hollow Road

Madison, WI 53711U.S.A.

Abbreviations and acronyms: RID: Rglement inte rnat ional conce rnant le trans port des marchandises dangereuses par chemin de fer (Regulations Conce rning the International Transport of Dangerous Goods by Rail) ADR: Accord europen sur le trans port des march andises dangereuses par Route (European Agree ment conce rning the Inter nationalCarriage of Dangerous Goods by Road)

SG


9/39

Page 1/7




Product identifier

Trade name: Lysis Buffer



Promega Corporation







Classification of the substance or mixture

GHS08 health hazard

H361 Suspected of damaging fertility or the unborn child.

GHS07

H302 Harmful if swallowed.(Contd. on page 2)

SG


10/39

Page 2/7




(Contd. of page 1)

H315 Causes skin irritation. H319 Causes serious eye irritation.

H333 May be harmful if inhaled.

Label elementsGHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS).

Hazard pictograms GHS07, GHS08 Signal word Warning

Hazard-determining components of labelling:guanidinium chlorideurea

Hazard statements Harmful if swallowed. May be harmful if inhaled.Causes skin irritation.Causes serious eye irritation.

Suspected of damaging fertility or the unborn child. Precautionary statementsWear protective gloves/protective clothing/eye protection/face protection.Use personal protective equipment as required.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Specific treatment (see on this label).Store locked up.

Dispose of contents/container in accordance with local/regional/national/international regulations.Other hazards

Results of PBT and vPvB assessment PBT: Not applicable.vPvB: Not applicable.


Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.Components:

50-01-1 guanidinium chloride H302; H332; H315; H319 25-50%57-13-6 urea H361; H319 25-50%

139-33-3 disodium dihydrogenethylenediaminetetraacetate


11/39

Page 3/7




(Contd. of page 2) After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. After swallowing:Call for a doctor immediately.Seek immediate medical advice.

Information for doctor: Most important symptoms and effects, both acute and delayed None Indication of any immediate medical attention and special treatment needed No further relevant information available.



Advice for firefighters No special advice.


Personal precautions, protective equipment and emergency procedures Wear protective clothing. Environmental precautions: Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. Reference to other sectionsSee Section 7 for information on safe handlingSee Section 13 for disposal information.


Handling Precautions for safe handlingKeep receptacles tightly sealed.

Ensure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.

Information about fire - and explosion protection: No special measures required.


Requirements to be met by storerooms and receptacles: No special requirements.

Information about storage in one common storage facility: Not required. Further information about storage conditions: Keep receptacle tightly sealed.Specific end use(s) No further relevant information available.


Additional information about design of technical facilities: No further data; see item 7.(Contd. on page 4)

SG


12/39

Page 4/7




(Contd. of page 3)

Control parameters Ingredients with limit values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to be monitored at

the workplace. Additional information: The lists valid during the making were used as basis.

Exposure controls Personal protective equipmentGeneral protective and hygienic measuresKeep away from foodstuffs, beverages and feed.

Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.

Avoid contact with the eyes and skin.Pregnant women should strictly avoid inhalation or skin contact.

Do not eat or drink while working.Clean skin thoroughly immediately after handling the product.

Respiratory protection:

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device. Protection of hands:Protective gloves.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation


Penetration time of glove material:The exact break trough time has to be found out by the manufacturer of the protective gloves and has to beobserved.

Eye protection: Tightly sealed goggles.




Odour: CharacteristicOdour threshold: Not determined.

Change in condition Melting point/Melting range: undetermined Boiling point/Boiling range: undetermined

Flash point: > 100C


Ignition temperature:


Self-igniting: Product is not selfigniting.



13/39


14/39

Page 6/7




(Contd. of page 5)Sensitization: No sensitizing effects known.



Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Results of PBT and vPvB assessment PBT: Not applicable.vPvB: Not applicable.Other adverse effects No further relevant information available.





UN-Number None



Packing group None




SG

(Contd. on page 7)


15/39

Page 7/7




(Contd. of page 6)


Safety, health and environmental regulations/legislation specific for the substance or mixtureGHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS).

Hazard pictograms GHS07, GHS08 Signal word Warning

Hazard-determining components of labelling:guanidinium chlorideurea

Hazard statements Harmful if swallowed. May be harmful if inhaled.Causes skin irritation.Causes serious eye irritation.Suspected of damaging fertility or the unborn child.

Precautionary statementsWear protective gloves/protective clothing/eye protection/face protection.Use personal protective equipment as required.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Specific treatment (see on this label).Store locked up.

Dispose of contents/container in accordance with local/regional/national/international regulations.

National regulations






LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent

SG


16/39

Page 1/6




Product identifier

Trade name: Binding Buffer



Promega Corporation







Classification of the substance or mixtureThe product is not classified according to the Globally Harmonized System (GHS).

Label elementsGHS label elements Void

Hazard pictograms Void Signal word Void

Hazard statements Void Other hazards

Results of PBT and vPvB assessment PBT: Not applicable.



17/39

Page 2/6




(Contd. of page 1)vPvB: Not applicable.


Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.Components:9002-92-0 Polyethylene glycol 400 dodecyl ether H315; H319; H335; H303 10-15%





Extinguishing mediaSuitable extinguishing agents:CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Special hazards arising from the substance or mixture None known Advice for firefighters No special advice. Protective equipment: No special measures required.


Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections No dangerous substances are released.See Section 7 for information on safe handlingSee Section 13 for disposal information.


Handling Precautions for safe handling No special measures required. Information about fire - and explosion protection: The product is not flammable



18/39

Page 3/6




(Contd. of page 2)



Information about storage in one common storage facility: Not required. Further information about storage conditions: None.Specific end use(s) No further relevant information available.




Additional information: The lists valid during the making were used as basis.

Exposure controls Personal protective equipmentGeneral protective and hygienic measuresThe usual precautionary measures are to be adhered to when handling chemicals.



Penetration time of glove material:

The exact break trough time has to be found out by the manufacturer of the protective gloves and has to beobserved. Eye protection: Goggles recommended during refilling.





Change in condition Melting point/Melting range: undetermined Boiling point/Boiling range: 100C

Flash point: Not applicable




19/39

Page 4/6




(Contd. of page 3)




Explosion limits: Lower: Not determined.Upper: Not determined.

Vapour pressure: Not determined.







Solids content: 7,7 %Other information No further relevant information available.







SG

(Contd. on page 5)


20/39

Page 5/6




(Contd. of page 4)



Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Results of PBT and vPvB assessment PBT: Not applicable.

vPvB: Not applicable.Other adverse effects No further relevant information available.





UN-Number None



Packing group None





Safety, health and environmental regulations/legislation specific for the substance or mixtureGHS label elements Void

Hazard pictograms Void (Contd. on page 6)

SG


21/39

Page 6/6




(Contd. of page 5)Signal word Void

Hazard statements Void





Madison, WI 53711

U.S.A. Abbreviations and acronyms: RID: Rglement inte rnat ional conce rnant le trans port des marchandises dangereuses par chemin de fer (Regulations Conce rning the International Transport of Dangerous Goods by Rail) ADR: Accord europen sur le trans port des march andises dangereuses par Route (European Agree ment conce rning the Inter nationalCarriage of Dangerous Goods by Road)

SG


22/39

Page 1/6




Product identifier

Trade name: MagaZorb Product



Promega Corporation














23/39

Page 2/6






Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.Components:1309-37-1 diiron trioxide H315; H319; H335 1,0-5,0%








Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: Dilute with plenty of water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections No dangerous substances are released.See Section 7 for information on safe handlingSee Section 13 for disposal information.





24/39

Page 3/6




(Contd. of page 2)






















25/39

Page 4/6




(Contd. of page 3)









Water: Fully miscible Partition coefficient (n-octanol/water): Not determined.










SG

(Contd. on page 5)


26/39

Page 5/6




(Contd. of page 4)


Toxicity Aquatic toxicity: Not harmful to the aquatic environment Persistence and degradability Not available Behaviour in environmental systems: Bioaccumulative potential Not known Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Not available Additional ecological information:General notes: Generally not hazardous for water.




Uncleaned packaging: Recommendation: Disposal must be made according to official regulations. Recommended cleansing agents: Water, if necessary together with cleansing agents.


UN-Number None



Packing group None



Transport in bulk according to Annex II of

MARPOL73/78 and the IBC Code Not applicable.






27/39

Page 6/6




(Contd. of page 5) Hazard statements Void


Waterhazard class: Generally not hazardous for water.Chemical safety assessment: A Chemical Safety Assessment has not been carried out.





SG


28/39

Page 1/6




Product identifier

Trade name: Wash Buffer



Promega Corporation














29/39

Page 2/6






Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.Components:9002-92-0 Polyethylene glycol 400 dodecyl ether H315; H319; H335; H303 5-10%








Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections No dangerous substances are released.See Section 7 for information on safe handlingSee Section 13 for disposal information.





30/39

Page 3/6




(Contd. of page 2)






















31/39

Page 4/6




(Contd. of page 3)












Solids content: 7,7 %Other information No further relevant information available.







SG

(Contd. on page 5)


32/39

Page 5/6




(Contd. of page 4)


Toxicity Aquatic toxicity: Not harmful to the aquatic environment Persistence and degradability Not available Behaviour in environmental systems: Bioaccumulative potential Not known Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Not available Additional ecological information:General notes:Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.

Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground. Results of PBT and vPvB assessment

PBT: Not applicable.vPvB: Not applicable.Other adverse effects No further relevant information available.





UN-Number None



Packing group None








33/39

Page 6/6




(Contd. of page 5) Hazard pictograms Void Signal word Void

Hazard statements Void

National regulationsWaterhazard class: Water hazard class 2 (Self-assessment): hazardous for water.Chemical safety assessment: A Chemical Safety Assessment has not been carried out.



Madison, WI 53711U.S.A. Abbreviations and acronyms: RID: Rglement inte rnat ional conce rnant le trans port des marchandises dangereuses par chemin de fer (Regulations Conce rning the International Transport of Dangerous Goods by Rail) ADR: Accord europen sur le trans port des march andises dangereuses par Route (European Agree ment conce rning the Inter nationalCarriage of Dangerous Goods by Road)

SG


34/39

Page 1/6




Product identifier

Trade name: Elution Buffer



Promega Corporation














35/39

Page 2/6






Chemical characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions.

Components: Void






Advice for firefighters No special advice. Protective equipment: No special measures required.


Personal precautions, protective equipment and emergency procedures Not required. Environmental precautions: No special measures required. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections No dangerous substances are released.See Section 7 for information on safe handlingSee Section 13 for disposal information.





36/39

Page 3/6




(Contd. of page 2)

















Change in condition Melting point/Melting range: 0C Boiling point/Boiling range: 100C





37/39

Page 4/6




(Contd. of page 3)






Density at 20C: 0,99993 g/cm Relative density Not determined.Vapour density Not determined.













SG

(Contd. on page 5)


38/39

Page 5/6




(Contd. of page 4)


Toxicity Aquatic toxicity: Not harmful to the aquatic environment Persistence and degradability Not available Behaviour in environmental systems: Bioaccumulative potential Not known Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Not available Additional ecological information:General notes: Generally not hazardous for water.





14 Transport informationUN-Number None



Packing group None







Hazard statements Void (Contd. on page 6)

SG


39/39

Page 6/6




(Contd. of page 5)


Waterhazard class: Generally not hazardous for water.Chemical safety assessment: A Chemical Safety Assessment has not been carried out.





SG

mb3001 vidrio del refri

Documents