b4x-ls4_eng
TRANSCRIPT
-
8/18/2019 B4X-LS4_eng
1/2
Specifications are subject to change without notice (27.10.2009) - A product of the CARLO GAVAZZI Group
Channel coding By BGP-COD-BAT and specialcable: GAP-TPH-CAB. Aftermounting, reprogramming can bedone by removing the slim pushbutton cover and pull the switchelement with a pair of pointed pliers(see drawing below), and connectthe cable to the connector on theback of the switch element.
Enclosure Aurora 44 x 44 Mechanics
Pulse prolongations Two bus scansIn/out 1 - 4 Pushbutton 1 - 4
In/out 5 - 8 LED 1 - 4 (see figure below)
Aurora Light Switch
B4X-LS4
ACCESSORIES
INPUT/OUTPUT SPECIFICATIONS
Programming cable to BGP-COD-BAT GAP-TPH-CAB
Frame Baseline (Fuga only) White 40417Charcoal Grey 40430-1
44
4 4
21
I1 / O5 I3 / O7
I2 / O6 I4 / O8
UP
smarthouseconnector
Programmingconnector for
BGP-COD-BAT
PUSHBOTTON/DIMENSIONS (mm)
Light switch for Building Automation applications
Developed to fit into wall socket and frames from Fuga, NIKO and Bticino
4 individually programmable pushbutton inputs
4 individually programmable LEDs for true response Supplied by smart-house bus, no external supply required
Channel coding by BGP-COD-BAT
Activated inputs are indicated by a blue LED
Non-activated inputs are indicated by an orange LED
Orange LED can be de-activated by an internal dipswitch
Delivered with both white and charcoal grey push button covers
GENERAL SPECIFICATIONS
Environment Degree of protection IP 20Pollution degree 3 (IEC 60664)Operating temperature 0 - 50 °C/32 - 122°FStorage temperature -20 - 70°C/-4 - 158°F
Humidity (non condensing) 20 - 80%
Weight 50 g
Dimensions 44 x 44 x 21mm
Max. wire in terminals Max. 2 x 0.75 mm2
Terminal D+. SignalTerminal D- GND
Power supply Supplied by smart-house bus
Rated operational current typically
All LEDs off 0.7 mAOrange LED on 1.0 mABlue LED on 1.0 mA
SUPPLY SPECIFICATIONS
Supply Colour Ordering no.by smart-house White B4X-LS4
No frame includedDelivered with both white and charcoalgrey push button covers
TYPE SELECTION
MODE OF OPERATION
The B4X-LS4 is a light switch with 4 buttons and 4 LED outputs. It isdeveloped to be mounted into a 44 x 44 wall socket from Fuga,NIKO and Bticino. The light-switch has two colors of LEDs to indi-cate non-activated channel (orange LED) and activated channel(Blue LED). By means of an internal dipswitch on the light switch theorange LED can be de-activated.The light switch is part of the smart-house concept for buildingautomation applications and can be used to control lights, roller
blinds and all other functions supported by the smart-house con-troller.
-
8/18/2019 B4X-LS4_eng
2/2
Specifications are subject to change without notice (27.10.2009) - A product of the CARLO GAVAZZI Group
1
2
REMOVE FROM SOCKET
By grabbing with a pair of pointedpliers on the corner of the screwhole,it is easy to pull the switch elementfrom the wall socket (NIKO,Bticino).
Dip-switch for selecting orange LED on or off
Aurora Light Switch
B4X-LS4
NOTE: When using the Fuga type, use the standard screwsfor Fuga to attach the unit into the wall box.
IMPORTANT: Be careful not to overtighten!
MOUNTING OF FUGA