recuperar ntfs
TRANSCRIPT
Recuperar NTFS
Se você apagou um arquivo importante do computador e agora quer reaver este arquivo.
Já utilizou diversos aplicativos e não conseguiu ter o resultado desejado, você pode usar
o Ubuntu para fazer essa recuperação.
Lembrando que você não precisa instalar o Ubuntu, basta rodar a versão Live CD.
Visitando o site do Baixaki, achei um tutorial ensinando a usar o Live CD e resolvi
colocar aqui no Visão Digital.
Para explicar o passo a passo, quatro arquivos foram criados e depois deletados da Área
de trabalho de um computador rodando Windows 7 Home Premium. Eles consistiam em
dois documentos de texto – um no formato DOC e o outro em TXT – e dois arquivos de
imagens, sendo um JPG e o segundo BMP.
A versão do Ubuntu utilizada foi a 10.04 Lucid Lynx beta 1, mas você pode utilizar as
anteriores sem problema algum. É aconselhado usar da versão 9.04 em diante, uma vez
que elas já possuem todos os recursos necessários instalados no Live CD.
1. Reiniciando o Sistema
Para dar início à recuperação de seus arquivos insira o pendrive ou Live CD do Ubuntu
no computador e o reinicie. Isso fará com que o sistema operacional do pinguim seja
iniciado e comece a rodar diretamente do dispositivo móvel escolhido, sem alterar nada
em seu HD e com todos os recursos oferecidos pela versão instalada disponíveis para
uso.
2. Abrir o Terminal
O passo seguinte é abrir o famoso Terminal de comandos do Ubuntu. Você o encontra
na opção “Acessórios” do menu “Aplicativos”.
3. Digitando os comandos necessários
Para conseguir recuperar os arquivos deletados, é preciso antes identificar o disco rígido
no qual você deseja procurar os documentos. Na janela do Terminal que foi aberta,
digite o seguinte comando:
sudo fdisk -l
Pressione a tecla Enter e aguarde alguns segundos até que as informações do HD sejam
mostradas na tela.
4. O que procurar?
O que você está procurando no resultado do comando acima é uma linha que termina
com HPSF/NTFS, pois ela exibe os dados de que precisamos a respeito da partição com
Windows. Anote os dados correspondentes à coluna “Device” da tabela (circulado em
vermelho na imagem abaixo).
Se há mais de um disco rígido instalado com formato NTFS será preciso identificar
corretamente aquele do qual você deseja recuperar os arquivos. Uma boa estratégia para
diferenciar um HD do outro é pelo tamanho deles. Olhando a segunda linha da imagem
acima é possível identificar o campo “Disk /dev/sdx”, o qual mostra o tamanho do disco
ali identificado.
5. Lista de arquivos recuperáveis
Agora que você já sabe como o disco desejado está identificado no sistema, é hora de
verificar quais arquivos podem ser recuperados. Para isso, digite o seguinte comando no
Terminal:
sudo ntfsundelete
No caso do HD que foi utilizado para os testes, o comando seria:
# ntfsundelete /dev/sda2
Isso porque ao digitar o primeiro comando (fdisk) o nome do disco rígido desejado
aparece como /dev/sda2. Caso o seu HD tenha outro nome, fique atento para digitar o
comando corretamente.
6. Interpretando e filtrando o resultado
O resultado do comando acima é uma lista de arquivos que foram deletados do disco.
Ela pode ser enorme, então não se assuste caso pareça que o Terminal enlouqueceu
depois de você apertar a tecla Enter.
Existem três colunas muito importantes nesta lista: “Inode”, “%age” e “Filename”. A
primeira delas, “Inode”, mostra o número de identificação de cada um dos arquivos.
Note que para cada linha da tabela esse número muda. Isso acontece porque o Inode
funciona como se fosse o RG do arquivo, ou seja, não podem existir dois iguais.
A segunda coluna de interesse, “%age”, é talvez a mais importante, uma vez que ela
mostra qual porcentagem do arquivo poderá ser recuperada. Arquivos com 100% de
%age podem ser totalmente recuperados, enquanto documentos com 0% de %age
podem ser considerados perdidos. Por fim, a coluna “Filename” da tabela mostra o
nome dos arquivos apagados.
Para saber se o arquivo desejado pode ser recuperado é preciso encontrá-lo na lista
exibida. Se o HD foi pouco usado, tudo bem. O problema é quando o disco rígido já
está em uso há um tempo. A lista de documentos removidos vai parecer não ter fim. A
fim de facilitar a busca o usuário pode criar alguns filtros utilizando o pipe junto com o
comando grep.
Grep? Pipe? Que tal uma ajuda? O pipe, representado pela barra vertical, permite a combinação de vários comandos no
Linux, enquanto que o grep é utilizado na criação de filtros, no intuito de diminuir o
número de resultados. Por exemplo, para mostrar apenas os arquivos do tipo DOC que
foram deletados do computador é possível utilizar a seguinte combinação de comando:
# ntfsundelete /dev/sda2 | grep .doc
Explicando
Aquela lista enorme de documentos apagados é enviada para o comando grep por meio
do |. O grep, por sua vez, vai mostrar na tela apenas as linhas que contenham .doc em
seu conteúdo. O comando grep é bem poderoso e permite criar os mais diversos filtros,
é só usar a imaginação!
7. Recuperar Agora que você já sabe como identificar o disco rígido, listar os arquivos deletados e
filtrar os resultados, finalmente é hora de recuperar os documentos. Existem duas
maneiras de fazer a recuperação: pelo nome do arquivo ou através do Inode. Os dois
modos restauram o arquivo da mesma maneira. A única diferença está no comando que
será utilizado.
Para recuperar o arquivo através do nome digite o seguinte comando no Terminal:
# ntfsundelete –u –m
Caso você prefira utilizar o Inode para restaurar o arquivo é só digitar:
# ntfsundelete –u –i
8- Finalizar
Os arquivos recuperados foram enviados para a Pasta Pessoal do Ubuntu, mas ainda não
podem ser abertos ou utilizados, pois não são reconhecidos pelo sistema operacional. O
comando abaixo faz com que os documentos sejam modificados e reconhecidos.
# chown ubuntu <Files>
<Files> são todos os arquivos que devem ser alterados. Se ocorrer tudo bem na
operação, o ícone dos documentos vai mudar, conforme mostra a figura abaixo.
Pronto, agora você pode copiar os arquivos para um pendrive e respirar aliviado!
Embora pareça complicado em um primeiro momento, o procedimento para
recuperação de arquivos e documentos é simples, basta seguir as instruções com
cuidado.
Name
ntfsundelete - recover a deleted file from an NTFS volume.
Synopsis
ntfsundelete [options] device
Description
ntfsundelete has three modes of operation: scan, undelete and copy.
Scan
The default mode, scan simply reads an NTFS Volume and looks for files that have
been deleted. Then it will print a list giving the inode number, name and size.
Undelete
The undelete mode takes the files either matching the regular expression (option -m) or
specified by the inode-expressions and recovers as much of the data as possible. It saves
the result to another location. Partly for safety, but mostly because NTFS write support
isn’t finished.
Copy
This is a wizard’s option. It will save a portion of the MFT to a file. This probably only
be useful when debugging ntfsundelete
Notes
ntfsundelete only ever reads from the NTFS Volume. ntfsundelete will never change
the volume.
Caveats
Miracles
ntfsundelete cannot perform the impossible.
When a file is deleted the MFT Record is marked as not in use and the bitmap
representing the disk usage is updated. If the power isn’t turned off immediately, the
free space, where the file used to live, may become overwritten. Worse, the MFT
Record may be reused for another file. If this happens it is impossible to tell where the
file was on disk.
Even if all the clusters of a file are not in use, there is no guarantee that they haven’t
been overwritten by some short-lived file.
Locale
In NTFS all the filenames are stored as Unicode. They will be converted into the current
locale for display by ntfsundelete. The utility has successfully displayed some Chinese
pictogram filenames and then correctly recovered them.
Extended MFT Records
In rare circumstances, a single MFT Record will not be large enough to hold the
metadata describing a file (a file would have to be in hundreds of fragments for this to
happen). In these cases one MFT record may hold the filename, but another will hold
the information about the data. ntfsundelete will not try and piece together such
records. It will simply show unnamed files with data.
Compressed and Encrypted Files
ntfsundelete cannot recover compressed or encrypted files. When scanning for them, it
will display as being 0% recoverable.
The Recovered File’s Size and Date
To recover a file ntfsundelete has to read the file’s metadata. Unfortunately, this isn’t
always intact. When a file is deleted, the metadata can be left in an inconsistent state.
e.g. the file size may be zero; the dates of the file may be set to the time it was deleted,
or random.
To be safe ntfsundelete will pick the largest file size it finds and write that to disk. It
will also try and set the file’s date to the last modified date. This date may be the correct
last modified date, or something unexpected.
Options
Below is a summary of all the options that ntfsundelete accepts. Nearly all options have
two equivalent names. The short name is preceded by - and the long name is preceded
by --. Any single letter options, that don’t take an argument, can be combined into a
single command, e.g. -fv is equivalent to -f -v. Long named options can be abbreviated
to any unique prefix of their name.
-b, --byte NUM
If any clusters of the file cannot be recovered, the missing parts will be filled
with this byte. The default is zeros.
-C, --case
When scanning an NTFS volume, any filename matching (using the --match
option) is case-insensitive. This option makes the matching case-sensitive.
-c, --copy RANGE
This wizard’s option will write a block of MFT FILE records to a file. The
default file is mft which will be created in the current directory. This option can
be combined with the --output and --destination options.
-d, --destination DIR
This option controls where to put the output file of the --undelete and --copy
options.
-f, --force
This will override some sensible defaults, such as not overwriting an existing
file. Use this option with caution.
-h, --help
Show a list of options with a brief description of each one.
-i, --inodes RANGE
Recover the files with these inode numbers. RANGE can be a single inode
number, several numbers separated by commas "," or a range separated by a
dash "-".
-m, --match PATTERN
Filter the output by only looking for matching filenames. The pattern can
include the wildcards ’?’, match exactly one character or ’*’, match zero or more
characters. By default the matching is case-insensitive. To make the search case
sensitive, use the --case option.
-O, --optimistic
Recover parts of the file even if they are currently marked as in use.
-o, --output FILE
Use this option to set name of output file that --undelete or --copy will create.
-P, --parent
Display the parent directory of a deleted file.
-p, --percentage NUM
Filter the output of the --scan option, by only matching files with a certain
amount of recoverable content. Please read the caveats section for more
details.
-q, --quiet
Reduce the amount of output to a minimum. Naturally, it doesn’t make sense to
combine this option with --scan.
-s, --scan
Search through an NTFS volume and print a list of files that could be recovered.
This is the default action of ntfsundelete. This list can be filtered by filename,
size, percentage recoverable or last modification time, using the --match, --size,
--percent and --time options, respectively.
The output of scan will be:
Inode Flags %age Date Size Filename
6038 FN.. 93% 2002-07-17 26629 thesis.doc
Flag Description
F/D File/Directory
N/R (Non-)Resident data stream
C/E Compressed/Encrypted data stream
! Missing attributes
The percentage field shows how much of the file can potentially be recovered.
-S, --size RANGE
Filter the output of the --scan option, by looking for a particular range of file
sizes. The range may be specified as two numbers separated by a ’-’. The sizes
may be abbreviated using the suffixes k, m, g, t, for kilobytes, megabytes,
gigabytes and terabytes respectively.
-t, --time SINCE
Filter the output of the --scan option. Only match files that have been altered
since this time. The time must be given as number using a suffix of d, w, m, y
for days, weeks, months or years ago.
-T, --truncate
If ntfsundelete is confident about the size of a deleted file, then it will restore
the file to exactly that size. The default behaviour is to round up the size to the
nearest cluster (which will be a multiple of 512 bytes).
-u, --undelete
Select undelete mode. You can specify the files to be recovered using by using -
-match or --inodes options. This option can be combined with --output, --
destination, and --byte.
When the file is recovered it will be given its original name, unless the --output
option is used.
-v, --verbose
Increase the amount of output that ntfsundelete prints.
-V, --version
Show the version number, copyright and license for ntfsundelete.
Examples
Look for deleted files on /dev/hda1.
ntfsundelete /dev/hda1
Look for deleted documents on /dev/hda1.
ntfsundelete /dev/hda1 -s -m ’*.doc’
Look for deleted files between 5000 and 6000000 bytes, with at least 90% of the data
recoverable, on /dev/hda1.
ntfsundelete /dev/hda1 -S 5k-6m -p 90
Look for deleted files altered in the last two days
ntfsundelete /dev/hda1 -t 2d
Undelete inodes 2, 5 and 100 to 131 of device /dev/sda1
ntfsundelete /dev/sda1 -u -i 2,5,100-131
Undelete inode number 3689, call the file ’work.doc’ and put it in the user’s home
directory.
ntfsundelete /dev/hda1 -u -i 3689 -o work.doc -d ~
Save MFT Records 3689 to 3690 to a file ’debug’
ntfsundelete /dev/hda1 -c 3689-3690 -o debug
And Linux saves the day again.
My son installed an application but mistakenly he selected the data directory as the
installation directory. When he realized it he decided to uninstall, but the full uninstall
deleted everything from the folder. This is: the program and all his files.
The solution was very easy. I found that I had already installed the ntfsprogrs package.
This package contains a pretty slick utility called ntfsundelete.
This utility allowed me to first list the files that I could recover and then recover them.
It has some very useful filters such as:
File name pattern matching: For example to search/undelete files *.mp3
Files modified since: Maybe you don't care about old deleted files just files
modified since 5 months ago
Percentage recoverable: In some cases you want to salvage whatever you can, in
some cases you only care if you can recover 90% or more, for example.
Files within a specific size range
In my case it was a breeze to use it.
I first unmounted the partition where the deleted files were
# umount /dev/sda2
I then executed the following to list which deleted mp3 files located in my /dev/sda2
device that were modified in the last 5 months were 100% recoverable:
# ntfsundelete /dev/sda2 -m '*.mp3' -p 100 -t 5m > deletedmp3.txt
That created a file called deletedmp3.txt with a list of files.
Once I reviewed the list I went on to undelete them and put the undeleted files on my
external HDD on a folder called undeleted
# ntfsundelete /dev/sda2 -u -m '*.mp3' -p 100 -t 5m -d
/media/externalExt3/undeleted
If you want to know how to fully use this utility just open a console and type man ntfsundelete
Important things to consider
If you deleted using the file manager first check if your files are in the trash can,
that's always the easiest way
As soon as you realize that you mistakenly deleted the files, don't write anything
else to that partition. if possible unmount it right away
If you want to do it in a computer that does not have linux installed, you can
always use a live CD distribution that includes the ntfsundelete utility