manual câmera neocam

Download Manual Câmera Neocam

Post on 18-Jul-2016

17 views

Category:

Documents

0 download

Embed Size (px)

DESCRIPTION

Manual de configuração da câmera ip Neocam.

TRANSCRIPT

  • Thank you for purchasing from SafetyBasement.com! We appreciate your business.We made this simple manual to help you enjoy your new product as quickly and easily as possible.Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest available manual.

    INSTRUCTION MANUAL

    Revised: June 28, 2013

    Neo Coolcam IP Camera

  • Page 2

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    PRODUCT REFERENCE

    IR BULBS

    POWER CONNECTOR

    FOCUS RINGCAMERALENSE

    EXTERNAL SPEAKER CONNECTOR

    LIGHT SENSOR

    EXTERNAL ALARM CONNECTORS

    WIFI ANTENNA CONNECTOR

    ETHERNET CONNECTION

  • Page 3

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Thank you for purchase this IP camera. With it, you will be able to check in on the area it is monitoring using the Internet and your smartphone.

    These instructions cover the basic setup and use of this product and should be followed carefully.

    Please note: setting up and IP camera does require some basic knowledge of your router and home network for proper operation. This manual will cover the basics, but there are many different router and network setups, so your particular setup may differ from the examples in this manual.

    THE PROCESS

    To set up your camera, we will do the following;

    1. Gather information about your network.2. Connect the camera with an ethernet cable for setup.3. Adjust settings on the camera.4. Test your settings5. Make the camera wireless6. Accessing the camera through the internet7. Accessing the camera with a smartphone app

    PREPARATION

    To properly set up your IP camera, you will need access to your WIFI network and your router.

    A secure WIFI network requires the proper settings and password to allow a device to work on it. You will need your password to make your camera wireless.

    Access to your router may be required to let you access your camera from the internet. You will need your router user name and password to make some basic changes to your router to allow access. We will show some general steps in this manual on router changes.

    Your camera set up requires some software that you will find on our website. Go to the product page, and to the TECH SUPPORT area. Please download any files located here.

    FOCUS RING

    INTRODUCTION

  • Page 4

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Please write down the info you gather on this page for your reference.

    1 Router Name:2 Router Password:3 Router Address: 192.168.0.14 Subnet Mask : 255.255.255.05 DNS Server: 192.168.2.1. / 192.168.0.16 Camera Address 192.168.0.1587 Http Port 808 Network Name9 Network Security Type10 Network Password11 My IP Address

    (IPChicken.com) 186.216.135.2812 Camera Admin Name13 Camera Admin

    Password

    SET UP INFORMATION

  • Page 5

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Each device on your network has a unique address, called an IP Address. These addresses allow the devices to talk to the network. Your PC has an IP Address, your router has one, and your camera will have one. Each address must be unique. They can look like this: 192.168.0.13. It is possible that your IP address uses different numbers than what is shown. Thats okay. Just keep notes on the page provided.

    First, were going to get the address of your network. Just look, dont make any changes.

    On your Windows PC, go to START. Then CONTROL PANEL.

    Click on VIEW NETWORK STATUS.

    INFO : YOUR IP ADDRESS

  • Page 6

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Your screen may look a little different, depending on your network setup and your version of Windows.

    Click on your CONNECTION. This will bring up information about your connection.

    INFO : YOUR IP ADDRESS

  • Page 7

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Now, click on DETAILS. This is where well get the information we need.

    INFO : YOUR IP ADDRESS

  • Page 8

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    You can see your PCs IP address. In this case, 192.168.0.13. The first 3 numbers are the same for all your devices on your network. Remember: your numbers may be different from what is shown in the examples. Use YOUR numbers.

    Your Router is called the Default Gateway. Copy this address into Slot 3 on your sheet.Copy the IPv4 Subnet Mask into Slot 4.

    A DNS server is needed for your PC and other devices to talk to the internet. Your camera will need 1 DNS address. Copy the first DNS address into Slot 5.

    When you are done, you can hit the RED X on these Windows to make them go away.

    Your PC IP

    3 - Router

    4 - Subnet Mask

    5 - DNS

    INFO : YOUR IP ADDRESS

  • Page 9

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    POWER CONNECTOR

    WIFI ANTENNA CONNECTOR

    ETHERNET CONNECTION

    Attach the WIFI antenna to the connector and screw on securely.

    CONNECTING THE CAMERA

  • Page 10

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Plug the ethernet cable into the port on the camera.

    CONNECTING THE CAMERA

  • Page 11

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Plug the the other end of the ethernet cable into a free port on your Router.

    Note: your Router may look different from the example shown.

    Ports are usually called LAN 1, LAN 2, and so on.

    CONNECTING THE CAMERA

  • Page 12

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Now plug in your power adapter.

    Please allow 30 seconds for your camera to start. It will move around during the start up process.

    During this time, your camera will try to find a free IP address on your network.

    CONNECTING THE CAMERA

  • Page 13

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    You are now going to use the software you downloaded from our site. This is called IP Camera Tool.

    IP Camera Tool will do one thing - it will locate your camera on your network and let you access it for the first time.

    Double-click IP Camera Tool and let it run. It may take a minute, but it should locate your camera on your network.

    Your camera will appear as ANONYMOUS and it will have a new IP Address that will look similar to other Addresses on your network. The last set of numbers will be unique to the camera.

    Remember, the numbers shown here are only examples. Your network could look quite different.

    When your camera appears in IP Camera Tool, double-click it.

    Your web browser should open and a login screen should appear.

    Note: Your camera works best with Internet Explorer. While it will work with other browsers, only Internet Explorer will show you ALL the options for your camera.

    IP CAMERA SOFTWARE

    The location on your network the cam-era found. This location may change if you do not make it permanant, as noted later in this manual.

  • Page 14

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Your login screen should appear in Internet Explorer or your main browser.Enter the name admin in the User area. All lower case.Click Sign In.

    LOG IN

  • Page 15

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Internet Explorer uses software called ACTIVE X to run some of the features of your camera. You should ALLOW ActiveX to run if you want all the features.

    After you ALLOW, you will need to LOGIN again.

    INTERNET EXPLORER

  • Page 16

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Your camera should now be working using the initial settings.

    Were going to make some quick changes to the settings. First, lets change the resolution of the camera to a higher setting.

    THE MAIN INTERFACE

  • Page 17

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Click and choose 640x480.

    SET RESOLUTION

  • Page 18

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

    Now change the MODE of your camera to suit your needs. In the US, this is usually 60 HZ, or Outdoor.

    Now, click on FOR ADMINISTRATOR, on the bottom right of the screen.

    CAMERA MODE

  • Page 19

    PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360

    www.Safet